true

Système de fixation StatLock™ CV Plus Pediatric

Le dispositif de stabilisation pédiatrique StatLock™ CV Plus s’adapte aux cathéters veineux centraux les plus couramment utilisés.

Présentation
Produits et accessoires
Mode d’emploi électronique et ressources
FAQ

Innovative teddy bear, foam, anchor-pad design.
Sterile and latex-free.

true

Les systèmes de fixation StatLock™ sont une alternative plus efficace à la bande adhésive pour aider à améliorer les résultats cliniques, la qualité des soins et la rentabilité économique. Le système de fixation StatLock™ CV Plus est un tampon en forme de nounours se présente sous forme de « montant et porte » pour loger les ailettes de suture, ainsi que sous forme de patch « à queue de cochon » pour retenir et organiser les lumières du cathéter.

StatLock™ CV Plus Stabilization Device, Pediatric, Foam, Sliding Post, Pigtail Retainer

SKU/REF vcdpp

true

Le corpus de publications de BD sur le secteur et nos offres vous donne des informations que vous pouvez utiliser pour continuer à viser l’excellence.

BD met à votre disposition des ressources de formation pour vous aider à améliorer vos pratiques cliniques, dans le cadre de notre objectif « faire progresser le monde de la santé ».

BD contribue au secteur de la santé en proposant des produits et des services de pointe pour améliorer les soins tout en diminuant les coûts. Nous organisons des événements et participons à des rencontres qui excellent à faire progresser le monde de la santé, conformément à notre devise « faire progresser le monde de la santé™ ».

BD promeut l’excellence clinique en mettant à disposition diverses ressources sur les meilleures pratiques, les innovations cliniques et les tendances du secteur de la santé.

All
For Patients
For Providers

Nearly.The StatLock stabilization device is contraindicated in patients with known allergies to adhesives or tapes.

While the StatLock stabilization device is probably appropriate for more than 99% of your patients; some people have skin that simply will not accept an adhesive-based product – their skin is too flaky, too greasy, or too diaphoretic. Use clinical judgment. Just know that where you can use StatLock stabilization device, your clinical and cost outcomes will be dramatically improved.

You do need to extend your insertion site alcohol prep or chlorhexidine prep widely to both sides to cover the securement site. This is a necessary step to cleanse the skin before the StatLock stabilization device application.

BD recommends the use of the skin prep pad included with the StatLock stabilization device. The skin prep provides an acrylic layer that protects the skin and enhances adherence of the anchor pad. Performing both of these steps will maximize product performance.

When you use the skin prep you'll need to allow it to dry for 10 to 15 seconds and make certain it is dry, meaning smooth to the touch – not tacky. Use your clinical judgment based on assessment of the patient's skin. Just remember, when skin prep is not used the StatLock stabilization devices may prematurely lift.

Yes.

Always orient the push-tab straight up.
Always connect the StatLock stabilization retainer device to the PIV before placing the StatLock stabilization device onto skin.
The blue StatLock stabilization device retainer clip is like an upside-down "V". Therefore, do not inadvertently squeeze it closed by compressing both sides. Instead, just hold one side and snap it over the hub of the catheter.

You can use them to:

Stabilize the catheter while prepping and securing with the StatLock stabilization device by applying the foam strips over the catheter hub
Fashion a J-loop with the IV tubing
Form a cushion under your luer lock spin nut
For extension sets without luer locks, wrap them around the catheter and the extension set connection for added security
Reinforce the StatLock stabilization devices. They are sterile, tape is not.

If you had a tape-secured PIV, then you would have to remove the tape to change the tubing.

StatLock IV Ultra stabilization device

With the StatLock IV Ultra stabilization device you can keep the stabilization device in place while you change tubing. Simply steady the retainer with the thumb and index finger of one hand while unscrewing the extension set. Remove the set. Then, while continuing to brace the retainer, press-fit and screw in your replacement extension set.

StatLock IV Select stabilization device

For StatLock IV Select stabilization device, you will need to replace the StatLock stabilization devices when you remove and replace the tubing – just as you would with tape securement; but this is a rare event offset by StatLock stabilization device advantages.

Nearly.The StatLock stabilization device is contraindicated in patients with known allergies to adhesives or tapes. While the StatLock stabilization device is probably appropriate for more than 99% of your patients; some people have skin that simply will not accept an adhesive-based product – their skin is too flaky, too greasy, or too diaphoretic. Use clinical judgment. Just know that where you can use StatLock stabilization device, your clinical and cost outcomes will be dramatically improved.

You do need to extend your insertion site alcohol prep or chlorhexidine prep widely to both sides to cover the securement site. This is a necessary step to cleanse the skin before the StatLock stabilization device application. BD recommends the use of the skin prep pad included with the StatLock stabilization device. The skin prep provides an acrylic layer that protects the skin and enhances adherence of the anchor pad. Performing both of these steps will maximize product performance. When you use the skin prep you'll need to allow it to dry for 10 to 15 seconds and make certain it is dry, meaning smooth to the touch – not tacky. Use your clinical judgment based on assessment of the patient's skin. Just remember, when skin prep is not used the StatLock stabilization devices may prematurely lift.

Yes. <li>Always orient the push-tab straight up.</li> <li>Always connect the StatLock stabilization retainer device to the PIV before placing the StatLock stabilization device onto skin.</li> <li>The blue StatLock stabilization device retainer clip is like an upside-down "V". Therefore, do not inadvertently squeeze it closed by compressing both sides. Instead, just hold one side and snap it over the hub of the catheter.</li>

You can use them to: <li>Stabilize the catheter while prepping and securing with the StatLock stabilization device by applying the foam strips over the catheter hub</li> <li>Fashion a J-loop with the IV tubing</li> <li>Form a cushion under your luer lock spin nut</li> <li>For extension sets without luer locks, wrap them around the catheter and the extension set connection for added security</li> <li>Reinforce the StatLock stabilization devices. They are sterile, tape is not.</li>

If you had a tape-secured PIV, then you would have to remove the tape to change the tubing. StatLock IV Ultra stabilization device With the StatLock IV Ultra stabilization device you can keep the stabilization device in place while you change tubing. Simply steady the retainer with the thumb and index finger of one hand while unscrewing the extension set. Remove the set. Then, while continuing to brace the retainer, press-fit and screw in your replacement extension set. StatLock IV Select stabilization device For StatLock IV Select stabilization device, you will need to replace the StatLock stabilization devices when you remove and replace the tubing – just as you would with tape securement; but this is a rare event offset by StatLock stabilization device advantages.

true

BD-19916

true

Système de fixation StatLock™ CV Plus Pediatric

BD（Japan コーポレートサイト）から移動しますEXIT2